Custom Street Light Decision: BF-SL-8M-100W Solar vs BF-LSL-4000-120W AC

Both luminaires come from BAIFU LIGHTING (Zhongshan Baifu Street Lamp Co., Ltd.), a custom outdoor lighting manufacturer based in Guzhen Town, Zhongshan City, Guangdong, China, with more than 13 years of outdoor lighting manufacturing experience and an 11,158 m² production facility. Its products are supplied to 71+ countries and markets, and the company concentrates on non-standard, project-specific outdoor lighting — which is why the comparison below is organised around project constraints rather than around a general product ranking.
Problem definition: the power format is a constraint, not a preference
Custom street light briefs usually start with appearance and end with a power argument. In practice the order should be reversed, because the power format drives the civil works, the maintenance plan, the control architecture and — on a decorative project — how much of the design intent survives procurement.
Three failure modes recur in project files:
- Design specified before power is confirmed. A decorative luminaire is selected for a site where the grid connection is absent or unreliable, and the project is later re-scoped around an off-grid solution.
- Energy storage treated as an afterthought. An off-grid configuration carries a battery. In the BF-SL-8M-100W that storage is a 12V 80Ah maintenance-free lead-acid battery, quoted with 2–3 days of rainy-day autonomy that can be configured to project requirements. It is an operational item to plan for, not a hidden detail.
- Control requirements added late. Photocell, timer, 0–10V dimming, DALI and smart lighting control are optional on the BF-LSL-4000-120W, while the BF-SL-8M-100W combines light control and time control with intelligent dimming inside its own solar system. These are different architectures, and they cannot be swapped after the pole design is frozen.
The practical framing is therefore this: the BF-SL-8M-100W is a separate-type solar street lamp, meaning the solar panel, battery and controller are separate from the luminaire and carried on the pole assembly. The BF-LSL-4000-120W is a grid-connected custom decorative luminaire operating on AC 85–265V, 50/60Hz, and it takes its design freedom from pole structure, bracket style and luminaire appearance rather than from an energy system.
Industry background: why both formats keep winning projects
Street lighting is a mature but still expanding category. The global street lighting market was valued at USD 9.1 billion in 2023 and is projected to reach USD 11.6 billion by 2030, a compound annual growth rate of 3.6% (Grand View Research). Within that market, LED lighting already accounted for 79.7% of total revenue in 2023, so the light-source question is largely settled; what remains contested is the power and control architecture around the LED.
Two further data points explain why this comparison matters beyond a single project. The installed base of smart street lights reached 32.9 million units globally at the end of 2024, with a 20.9% CAGR projected through 2029 (Berg Insight), which means dimming and control protocols are migrating from premium tenders into ordinary projects. At the same time, Africa has been the fastest-growing regional lighting market, with over 4% average annual growth since 2018, driven largely by public infrastructure programmes (CSIL) — and infrastructure programmes in regions with uneven grid coverage are exactly where off-grid solar luminaires compete directly with grid-connected decorative designs.
Standards shape the same decision. In Europe, the EN 13201 series (parts 1–5) defines quality, performance and energy indicators for road and street lighting design. In the United States, ANSI/IES RP-8 is the primary national standard for lighting roadway and parking facilities, focused on luminance and safety criteria. D4i and Zhaga are increasingly adopted in smart street lighting for interoperability between sensors and luminaires. A custom project that ignores these frameworks can pass a visual inspection and still fail acceptance.
Detailed solution: the two luminaires, in verified specifications
BF-SL-8M-100W — 8-metre separate-type solar LED street lamp
The BF-SL-8M-100W is an off-grid solar street light built around an 8-metre single-arm conical pole with a 90° lamp arm installation angle. The pole is Q235 high-quality steel with overall hot-dip galvanizing followed by electrostatic spraying, fixed on pre-buried anchor bolts. Wind resistance is not a fixed number: the structure is designed according to the wind speed at the project location.
- LED power: 100W, luminous efficacy ≥150 lm/W.
- Solar panel: 200W high-efficiency monocrystalline silicon.
- Battery: 12V 80Ah maintenance-free lead-acid.
- Colour temperature: 3000K, 4000K, 5000K, 6000K selectable; colour rendering index Ra≥70.
- Protection: IP65/IP66.
- Control: light control plus time control, with intelligent dimming supported.
- Operating conditions: −20°C to +60°C, 10–12 lighting hours per day, 2–3 days of rainy-day battery autonomy, configurable according to project requirements.
- Customization: height, power, colour, battery capacity, solar panel and pole design can all be customised.
Listed application scopes for this model include municipal road lighting, rural road projects, urban side roads, industrial parks, residential communities, park roads, schools, hospitals, parking lots, commercial plazas, government projects and overseas infrastructure lighting projects.

BF-LSL-4000-120W — custom LED landscape street light
The BF-LSL-4000-120W is a non-standard decorative luminaire designed as part of a project's street furniture rather than as a catalogue item. Its defining characteristics are architectural: pole structures can be conical, square, special-shaped or artistic; brackets can be single-arm, double-arm, multi-arm or combined high-low lamp heads; and road, plaza or decorative landscape light distributions can be specified.
- Input voltage: AC 85–265V, 50/60Hz.
- LED power: 60W, 80W, 100W, 120W, 150W, 180W, 200W options.
- Mounting height: 6m, 8m, 10m, 12m, customizable per project requirements.
- Optical: luminaire efficacy ≥130 lm/W; colour temperature 2700K, 3000K, 4000K, 5000K, 6000K; Ra≥70 with Ra≥80 optional; power factor PF≥0.95; service life ≥50,000 hours.
- Protection: IP65/IP66; Class I electric shock protection.
- Operating temperature: −30°C to +60°C.
- Control: on/off control as standard; photocell, timer, 0–10V dimming, DALI and smart lighting control optional.
- Materials: Q235 hot-dip galvanized steel, 304 stainless steel, die-cast aluminium lamp housings, high-transmittance tempered glass, stainless steel fasteners and outdoor electrostatic powder coating.
- Decorative features: hollow patterns, luminous decorations, city logos, cultural totems and exclusive project elements optional. Standard colours are dark grey, black, silver grey and bronze, customizable per RAL colour card.
Listed application scenarios include urban roads, parks, plazas, commercial streets and large-scale landscape lighting projects.

Step-by-step breakdown: running the decision on a real project
Step 1 — Confirm what the grid can actually deliver
The BF-LSL-4000-120W accepts AC 85–265V, 50/60Hz, a wide input window that suits sites where supply voltage fluctuates. Where the grid is absent, unreliable, or the connection cost falls outside the civil works allowance, the BF-SL-8M-100W removes that dependency and replaces it with a 200W monocrystalline silicon panel and a 12V 80Ah battery. This is the first question to answer, because every later decision depends on it.
Step 2 — Classify the application before the product
Municipal road and area lighting at a fixed 8-metre mounting height points to the BF-SL-8M-100W, whose listed scopes include municipal roads, urban side roads, park roads and industrial parks. Decorative, architectural and identity-driven applications point to the BF-LSL-4000-120W, designed as a non-standard product with selectable pole geometry, bracket style and decorative features. A project that needs both a traffic corridor and a signature plaza can legitimately use two different formats rather than compromising on one.
Step 3 — Plan the battery, not only the luminaire
Rainy-day autonomy of 2–3 days is configurable, so the project should state its worst-case weather assumption early and size battery capacity accordingly. Ask where the battery will be reached for service, at what height, and how the pole design accommodates it. On the grid-connected model no battery exists, which simplifies maintenance across a luminaire service life of ≥50,000 hours.
Step 4 — Set the aesthetic brief against manufacturing limits
The BF-LSL-4000-120W supports hollow patterns, luminous decorations, city logos and cultural totems, with standard colours in dark grey, black, silver grey and bronze plus RAL-based customization. Wind resistance is structurally designed according to pole height and local wind speed of the project site, so decorative ambition and structural verification have to be developed together rather than sequentially.
Step 5 — Freeze the control architecture
The solar model combines light control and time control with intelligent dimming managed inside its own system. The AC model offers conventional on/off control as standard, with photocell, timer, 0–10V dimming, DALI and smart lighting control available as options. If a specification requires DALI or 0–10V, that requirement should be written into the quotation, because control gear choices affect both the luminaire and the pole wiring.
Step 6 — Define acceptance and verification checkpoints
BAIFU LIGHTING products generally pass appearance inspection, electrical performance test and protection level test. On a live project those translate into concrete checkpoints: IP65/IP66 protection confirmed by the protection level test; luminous efficacy verified against the claim for the ordered model (≥150 lm/W for the BF-SL-8M-100W, ≥130 lm/W for the BF-LSL-4000-120W); colour temperature and Ra checked against the order; control functions demonstrated; pole coating and hot-dip galvanizing inspected; and flange base, embedded anchor bolt layout and arm angle checked against the approved drawing.
Step 7 — Fix the commercial envelope
Lead time is 15 to 18 days, monthly production capacity is 3,000–5,000 units for regular orders, and minimum order quantity is 20 sets for a standard style and 5 sets for a custom style. For decorative work, the 5-set custom threshold is what makes a first article possible before a bulk commitment.
Use cases: where each format belongs
Off-grid corridors and infrastructure edges. Coastal roads, rural roads, urban side roads, industrial parks, parking areas and community roads without a reliable supply are the natural home of the BF-SL-8M-100W. The 8-metre pole, 100W LED and 200W panel form a self-contained unit that requires no cable trenching, and the 2–3 day autonomy buffer can be increased by adjusting battery capacity as part of customization.
Municipal and landscape identity projects. Urban roads, parks, plazas, commercial streets and tourism landscapes suit the BF-LSL-4000-120W. Its 60–200W power range and 6/8/10/12 m mounting options let one design family serve a carriageway and a plaza edge, while decorative elements can carry a city logo or a cultural motif. One delivered example is a municipal project of 68 custom landscape street lights installed along urban roads and characteristic streets: the luminaires operated stably after installation, night-time road brightness was uniform and within the range needed for vehicles and pedestrians, and the pole design coordinated with the road greening and surrounding urban environment.
Mixed sites. A single development can use both formats — grid-connected decorative luminaires in the visible core where power exists, and solar luminaires on the perimeter, service roads or future phases where the connection is not yet built. Because both come from the same manufacturer, pole finishing, colour specification and project documentation can be aligned even when the power formats differ.
Comparison table: BF-SL-8M-100W vs BF-LSL-4000-120W
| Decision parameter | BF-SL-8M-100W (off-grid solar) | BF-LSL-4000-120W (grid-connected AC) |
|---|---|---|
| Power source | 200W high-efficiency monocrystalline silicon solar panel; 12V 80Ah maintenance-free lead-acid battery | AC 85–265V, 50/60Hz |
| LED power | 100W | 60W / 80W / 100W / 120W / 150W / 180W / 200W options |
| Mounting height | 8 m single-arm conical pole, arm installation angle 90° | 6m, 8m, 10m, 12m; customizable per project |
| Luminous efficacy | ≥150 lm/W | ≥130 lm/W |
| Colour temperature | 3000K, 4000K, 5000K, 6000K | 2700K, 3000K, 4000K, 5000K, 6000K |
| Colour rendering index | Ra≥70 | Ra≥70; Ra≥80 optional |
| Power factor | — | PF≥0.95 |
| Protection rating | IP65/IP66 | IP65/IP66; Class I electric shock protection |
| Operating temperature | −20°C to +60°C | −30°C to +60°C |
| Daily lighting duration | 10–12 hours per day | — |
| Backup autonomy | 2–3 rainy days, configurable per project | Not applicable (grid-fed) |
| Control system | Light control + time control, supports intelligent dimming | On/off standard; photocell, timer, 0–10V dimming, DALI and smart lighting control optional |
| Pole and bracket structure | Single-arm conical pole | Conical, square, special-shaped or artistic structures; single-arm, double-arm, multi-arm and combined high-low lamp heads |
| Decorative capability | — | Hollow patterns, luminous decorations, city logos, cultural totems and exclusive project elements optional |
| Light distribution | — | Road lighting, plaza lighting or decorative landscape distribution optional |
| Materials | Q235 steel pole, hot-dip galvanizing, electrostatic powder coating, die-cast aluminium LED housing, tempered glass, monocrystalline panel | Q235 hot-dip galvanized steel, 304 stainless steel, die-cast aluminium housings, tempered glass, stainless steel fasteners, outdoor electrostatic powder coating |
| Service life (luminaire) | — | ≥50,000 hours |
| Quality system | ISO 9001 (global market) | ISO 9001 (global market) |
All values are taken from the published specifications of the two BAIFU LIGHTING models. A dash (—) means the parameter is not stated in the specification used for this comparison and should be confirmed during quotation.
Acceptance, documentation and compliance checkpoints
Both models are covered by the ISO 9001 Quality Management System certification held by Zhongshan Baifu Street Lamp Co., Ltd. under certificate number 52824Q10676R0S, issued by Guangdong Rules Certification Co., Ltd. (GRRC) on 2024-07-23 and valid to 2027-07-22, with a scope covering the production of road and street lighting lamps. The certification is applicable to the global market, mutually recognized domestically and internationally, and used for government bidding and overseas trade projects.
The company also holds CCC certificate 2017011001975444, issued by the China Quality Certification Centre (CQC) on 2022-05-15 and valid to 2027-05-15 under GB 7000.1-2015 and GB 7000.201-2008. Its certified scope covers fixed luminaires for incandescent lamps (ground-mounted garden lamp) with E14/E27 lampholder, Class I electric shock protection, IP44 and 220–240V~ 50/60Hz, for the Chinese Mainland market. It should be read for exactly what it covers.
For EU projects, EN 13201 (parts 1–5) is the framework that defines quality, performance and energy indicators for road lighting design, while ANSI/IES RP-8 governs roadway and parking facility lighting in the United States. Because the applicable product-level documents depend on the final configuration — driver, control gear and battery — the required document set should be agreed at quotation stage rather than after production.


BAIFU LIGHTING provides English product specifications, quotations, CAD drawing support, packaging information, export documentation and shipment coordination according to project requirements, along with installation instructions, remote technical support, fault diagnosis and accessory supply after delivery.
Frequently asked questions
Which certificates should an EU project buyer verify for custom street lights?
Start with the quality management system. Both the BF-SL-8M-100W and the BF-LSL-4000-120W are covered by the ISO 9001 certification issued to Zhongshan Baifu Street Lamp Co., Ltd. under certificate number 52824Q10676R0S by Guangdong Rules Certification Co., Ltd., issued on 2024-07-23 and valid to 2027-07-22, with a scope covering the production of road and street lighting lamps; the certification applies to the global market and is used for government bidding and overseas trade projects. The company also holds CCC certificate 2017011001975444 issued by the China Quality Certification Centre (CQC) under GB 7000.1-2015 and GB 7000.201-2008, whose certified scope covers fixed luminaires for incandescent lamps (ground-mounted garden lamp) with E14/E27 lampholder, Class I protection, IP44 and 220–240V~ 50/60Hz for the Chinese Mainland market, so it should be read as a market-specific certificate rather than an EU document. For EU projects, EN 13201 (parts 1–5) defines the quality, performance and energy indicators used in road lighting design, and D4i and Zhaga are increasingly adopted for sensor-to-luminaire interoperability. Because product-level documents depend on the final configuration, the exact document set required should be confirmed at quotation stage.
Do both luminaires support dimming and smart control in the same way?
No — the two models use different control architectures. The BF-SL-8M-100W uses light control plus time control and supports intelligent dimming, with the dimming function managed inside the solar system alongside the 200W panel and the 12V 80Ah battery. The BF-LSL-4000-120W uses conventional on/off control as standard, with photocell, timer, 0–10V dimming, DALI and smart lighting control available as options, which lets it be integrated into a wider control layer. If a tender requires DALI or 0–10V, that requirement should be written into the specification for the grid-connected model, or confirmed for the solar configuration before ordering.
How should cost be compared between a solar and an AC custom street light?
Neither published specification includes a price, so the comparison should be built from scope rather than from a headline figure. The BF-SL-8M-100W includes a 200W monocrystalline panel, a 12V 80Ah battery and its controller within one pole assembly, and it removes grid connection and cable trenching from the civil works; the battery is a wear item that should be planned into the project's maintenance cycle. The BF-LSL-4000-120W has no battery but requires available grid power at AC 85–265V, and its 60–200W power range lets a project match output to the required light level instead of over-specifying. Commercial parameters are shared across both: lead time is 15 to 18 days, monthly capacity is 3,000–5,000 units for regular orders, and minimum order quantity is 20 sets for a standard style and 5 sets for a custom style. Comparing quotations on equal scope — pole height, quantity, control requirement and documentation — is the only reliable basis.
Can a sample or first article be produced, and what should be checked on it?
Non-standard development is part of the manufacturing scope: appearance design, height, power, bracket structure, colour, patterns, light source configuration and control systems can all be customised, and the 5-set minimum for custom styles allows a first article before a bulk commitment. Recommended sample checks are the protection level test for the IP65/IP66 claim, luminous efficacy measured against the claim for the ordered model, colour temperature and Ra verified against the order, control functions demonstrated, appearance inspection covering coating and welding quality, and dimensional checks against the approved drawing including the flange base and embedded anchor bolt layout.
What is the production lead time and minimum order quantity?
Lead time is 15 to 18 days, minimum order quantity is 20 sets for a standard style and 5 sets for a custom style, and monthly production capacity is 3,000–5,000 units for regular orders. After delivery, BAIFU LIGHTING provides installation instructions, remote technical support, fault diagnosis and accessory supply, with repair, replacement or supplementary service as stipulated in the contract for quality issues. To start a comparison for a specific project, send the pole height, quantity, power requirement and control requirement to BAIFU LIGHTING via WhatsApp +86 195 8242 2595 or chenyingjie@baifulamp.com.
Conclusion
The BF-SL-8M-100W and the BF-LSL-4000-120W are not competing for the same site — they are competing for the same budget line. The solar model answers a constraints problem: no dependable grid, no appetite for trenching, a fixed 8-metre mounting height, 10–12 lighting hours per day and a 2–3 day autonomy buffer, delivered with light control, time control and intelligent dimming at ≥150 lm/W and IP65/IP66. The AC model answers a design problem: available grid power at AC 85–265V, 6/8/10/12 m mounting heights, 60–200W power options, ≥130 lm/W, IP65/IP66 with Class I protection, and optional photocell, timer, 0–10V, DALI or smart control carried on conical, square, special-shaped or artistic poles with decorative features such as hollow patterns and city logos.
The decision rule that survives contact with real projects is simple. Confirm grid availability first, classify the application second, plan the battery third, set the aesthetic brief fourth, freeze the control architecture fifth, and write the acceptance checkpoints — IP rating test, efficacy, colour temperature, control functions and structural drawing compliance — into the purchase order before production starts.
Next step: compare these two models on your own project
Send BAIFU LIGHTING the pole height, quantity, power requirement, control requirement and project location, and the engineering team can advise which format fits — solar, grid-connected decorative, or a mix of both across one site. CAD drawing support, sample development and project quotation are part of the standard workflow.
WhatsApp: +86 195 8242 2595 | Tel: +86 186 8015 2652 | Email: chenyingjie@baifulamp.com | Website: www.baifulamp.com
Download the BAIFU LIGHTING customized product catalogue (PDF) for the full model range, pole structures and finish options.

Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.